NSN 6515-01-500-5898 · NIIN 015005898 · FSC 6515
NO DASHES 6515015005898
In Stock
INSTRUMENT AND IMPLANT SET,MINI-
Medical and Surgical Instruments, Equipment, and Supplies
Technical characteristics
5 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ALPC | COMPONENT AND QUANTITY | (2) DRILL, BIT QUICK COUPLING, 1.1MM, 60MM, 1.5MM, 85MM, 2.0MM, 100MM, 2.7MM, 100MM; COUNTERSINK, FOR 2.7MM, 1.5MM, AND 2.0MM CORTEX SCREWS; HANDLE W/MINI QUICK COUPLIN, STAINLESS STEEL; (2) TAP CORTEX SCREWS FOR 1.5MM, 50 MM, 2.0MM, 54MM, AND 2.7MM, 100MM; HANDLE FOR QUICK COUPLING; (1) DOUBLE DRILL SLEEVE 1.5MM/1.1MM, 2.0MM/1.5MM, AND 2.7MM/2.0MM; 2.0MM PARALLEL DRILL GUIDE AND DRILL SLEEVE; SMALL HEAXAGONAL SCREWDRIVER SHAFT; CRUCIFORM SCREWDRIVER SHAFT WITH HOLDING SLEEVE; DEPTH GAUGE FOR 2.7 MM AND 3.5MM CORTEX AND 4.0MM CANCELLOUS BONE SCREWS; SHARP HOOK; SCREW FORCEPS; BENDING IRON FOR 1.5 MM AND 2.0MM PLATES; BENDING PLIERS, FOR 1.5MM AND 2.0MM PLATES; WIRE CUTTER 175MM LENGTH; HOLDING FORCEPS, FOR SMALL PLATES; 135 MM LENGTH; HOLDING FORCEPS, WITH FOOT, FOR MINI PLATES, 135MM LENGTH, (2) HOHMANN RETRACTOR 6MM, 8MM; PERIOSTEAL ELEVATOR, 3MM WIDTH, CURVED BLADE, STRAIGHT EDGE; REDUCTION FORCEPS WITHPOINTS, 130 MM LENGTH, RATCHET. |
| ANEH | DESIGN DESIGNATION | SYNTHES |
| CBBL | FEATURES PROVIDED | REUSABLE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | INSTRUMENT & IMPLANT SET MINI-FRAGMENT |
| FEAT | SPECIAL FEATURES | (4) 1.5 MM CORTEX SCREWS, SELF-TAPPING, 6 THROUGH 12, 14 AND 16MM; (6) 2.0MM 6, 8, 10, 12, 14, 16, 18 AND 20; (6) 2.7, 6, 8, 10, 12, 14, 16, 18, 20, 22 AND 24MM; (6) WASHER, 7.0 MM FOR SMALL SCREWS; (2) QUARTER-TUBULAR PLATES WITH COLLAR 3 THROUGH 8 HOLES; (2) 2.7MM LEFT AND RIGHT L-PLATES, 3 HOLES OBLIQUE; (4) 2.7MM T-PLATE, 3 HOLES; KIRSCHNER WIRES, TROCAR POINT; 1 PKG 0.6 AND 0.8 MM DIA; 70 MM; 1 PKG 1.0, 1.25 AND 1.6 MM DIA; 150 MM AND (1) GRAPHIC CASE: NEW PART NUMBER 305.575. PENDING NEW NSN. |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 105.488 | 63075 |
| 6515NCM020860 | 64616 |
| 02-1399 | 89875 |