NSN 6520-00-935-9872 · NIIN 009359872 · FSC 6520
NO DASHES 6520009359872
In Stock
MANDREL,DENTAL HANDPIECE
Dental Instruments, Equipment, and Supplies
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.870 |
| CBJZ | HANDPIECE TYPE FOR WHICH DESIGNED | ANGLE |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.080 |
| APGF | DESIGN TYPE | SLOTTED |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| ANEH | DESIGN DESIGNATION | FRICTION |
| SUPP | SUPPLEMENTARY FEATURES | FOR USE W/CONTRA-ANGLE HANDPIECE,6520-00-019-9267 AND DRIVING PIN,6520-00-935-9869 AND 6520-00-420-0508 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MANDREL DENTAL HANDPIECE LATCH-TYPE LONG AUTOMATIC CLUTCH 2S |
| FEAT | SPECIAL FEATURES | LATCH TYPE; LONG; AUTOMATIC CLUTCH; PIN DRIVING TYPE HEAD; FOR HOLDING AND DRIVING THREAD-FORMING PIN INTO PIN HOLE IN DENTIN OF TEETH FOR RETENTION OF RESTORATIONS IN THE THREAD-FORMING SCREW TECHNIQUE; SHAFT RELIEVED TO PREVENT ENGAGEMENT BY HANDPIECE CHUCK; CONE SHAPED CONTACT AREA PROVIDES CLUTCH ACTION |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.091 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A-63-4 | 29929 |
Supersedes
This item replaces cancelled NIIN 013285231. An older drawing citing one of those numbers resolves here.