NSN 6520-01-205-2426 · NIIN 012052426 · FSC 6520
NO DASHES 6520012052426
In Stock
TRIMMER,DENTAL MODEL
Dental Instruments, Equipment, and Supplies
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABFF | FURNISHED ITEMS | WASTE RECEIVING RESERVOIR |
| ABFY | OVERALL DEPTH | INCHES NOMINAL 15.500 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 13.000 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 12.000 |
| ACDC | CURRENT TYPE | AC |
| AKYN | FURNISHED ITEMS AND QUANTITY | POWER CABLE3-CONDUCTOR 3 PRONG PLUG 7-1/2 FT LG 1; 3 BLADE MALE CONNECTOR 1; ON-OFF SWITCH 1; CUP CASTER RUBBER 4; HOSE DRAIN 2.500 FT LG; TABLE WORK ADJUSTABLE AND REMONEABLE 1; TUBE WATER INLET 4 FT LG; WHEEL ABRASIVE DIA 10 IN. (25.4 CM) BY 1/4 IN. (0.64 CM) WIDE 1 |
| AMSE | VOLTAGE RATING | VOLTS MINIMUM 115.0 AND VOLTS MAXIMUM 230.0 |
| ANCY | HORSEPOWER RATING | 0.333 |
| ANPT | POWER RATING | WATTS NOMINAL 225.0 |
| APTT | OPERATING FREQUENCY | HERTZ MINIMUM 50.0 AND HERTZ MAXIMUM 60.0 |
| AYQD | RATED SPEED IN RPM | NOMINAL 1725.0 |
| CJYJ | GRINDING SURFACE LENGTH AT OPENING | INCHES NOMINAL 5.000 |
| CJYK | GRINDING SURFACE WIDTH AT OPENING | INCHES NOMINAL 4.000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | TRIMMER DENTAL MODEL 115 VOLT AC 60HZ W/CABLE 13X12X15.5" |
| FEAT | SPECIAL FEATURES | FOR REPLACEMENT ABRASIVE WHEEL,ORDER,6520-00-564-4055 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| G-287 | 64616 |