NSN 5305-00-246-7449 · NIIN 002467449 · FSC 5305
NO DASHES 5305002467449
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.178 AND INCHES MAXIMUM 0.198 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.192 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.362 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.510 AND INCHES MAXIMUM 0.540 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.377 AND INCHES MAXIMUM 0.384 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.058 AND INCHES MAXIMUM 0.060 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R54520 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS621,CO- 6AL-4V |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |