NSN 6525-01-512-1960 · NIIN 015121960 · FSC 6525
NO DASHES 6525015121960
In Stock
PROCESSING MACHINE,PHOTOGRAPHIC
Imaging Equipment and Supplies: Medical, Dental, Veterinary
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABFF | FURNISHED ITEMS | TEMP CONTROLLED FEATURE |
| ACDC | CURRENT TYPE | AC |
| ACZB | FREQUENCY RATING | HERTZ NOMINAL 60.0 |
| AFJF | SPECIFIC USE | FILM PROCESSING MACHINE |
| AKHW | LOADING CHARACTERISTIC | DAYLIGHT |
| ALBY | USAGE DESIGN | FILM |
| AMQY | INSTALLATION DESIGN | PORTABLE |
| BJMX | LOADING TYPE | MAGAZINE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MODEL A/T 2000 X-RAY FILM PROCESSOR |
| ELEC | VOLTAGE IN VOLTS | 115.0 |
| FAAZ | PHASE | SINGLE |
| FEAT | SPECIAL FEATURES | 8 AMPS; THREE PRONG PLUG REQUIRED; 2.5 MINUTE ENDO QUICK LOOK FILM PROCESSING; 5.5 MINUTE ARCHIVAL FILM PROCESSING; WATER FLOE .5 GPM; REQUIRES 80 PSI MAX WATER PRESSURE WITH 30PSI MIN; WATER SOURCE MUST HAVE MANUAL SHUT OFF NEAR PROCESSOR; ADAPTERS TO CONNECT .5 INCH MPT OR .75 INCH MALE GARDEN HOSE FITTING; SUPPLIED TUBING AT REAR OF PROCESSOR IS 6 FEET LONG; VACUUM BREAKER NOT REQUIRED; 1 INCH AIR GAP BETWEEN WATER SUPPLY INLET AND TOP OF TANK; WATER TEMP 55 DEG F TO 80 DEG F; MIXING VALVE NOT REQUIRED IF WATER TEMP IS IN RANGE; 1.5 INCH PVC STANDPIPE CONNECTED TO A 1.5 INCH PVC TRAP; DO NOT DRAIN INTO COPPER OR BRASS |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A/T 2000 | 53542 |
| LL-H36-8308 | 66736 |