NSN 6530-01-519-4798 · NIIN 015194798 · FSC 6530
NO DASHES 6530015194798
In Stock
PATIENT WARMING
Hospital Furniture, Equipment, Utensils, and Supplies
Technical characteristics
3 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PATIENT WARMING FORCED AIR TEMPERATURE MANAGEMENT UNIT |
| FEAT | SPECIAL FEATURES | SHALL BE A PATIENT TEMP MANAGEMENT SYSTEM DESIGNED TO REGULATE PATIENT TEMPERATURE BY THE APPLICATION OF A HYPERTHERMIA BLANKET THRU WHICH TEMP-CONTROLLED AIR IS CIRCULATED; THE TEMP CONTROL SHALL PROVIDE MIN OF 3 AIR TEMP SETTINGS BETWEEN 32 AND 43 DEG C (89.6A& 109.4 DEG F); SYSTEM SHALL PROVIDE MINIMUM FLOWRATE OF 25 CFM; AN OVER TEMP VISUAL & AUDIBLE ALARM SHALL ACTIVATE WHEN AIR TEMP EXCEEDS 53 DEG C (127.4 DEG F); HEAT SHALL AUTOMATICALLY SHUTDOWN BY AN OVER-TEMP CONDITION; OPERATION OF PATIENT WARMER SHALL NOT BE ADVERSELY AFFECTED BY ELECTROMAGNETIC INTERFERENCE (I.E. OPERATION OF ELECTROSURGICAL UNIT); SHALL WEIGH LESS THAN 15 LBS; BE FREESTANDING OR ATTACHABLE TO IV POLE; THE UNIT SHALL BE CAPABLE OF QUIET OPERATION W/NOISE LEVELS < 60DB(A) MEASURED 3-FT FROM UNIT; SHALL OPERATE ON 120 VOLTS; SHALL BE SUPPLIED W/NATIONALLY RECOGNIZED LAB (LIKE UL)APPROVED; 3-WIRE POWER CORD & PLUG SUITABLE FOR HOSPITAL ENVIRONMENTS |
| SUPP | SUPPLEMENTARY FEATURES | THE UNIT SHALL BE PROVIDED WITH AT LEAST 10 BLANKETS (EA): UPPER BODY, LOWER BODY, AND TORSO. A MINMUM 6.0 FT LONG, 3 IN. HOSE SHALL BE INCLUDED TO CONNECT THE UNIT TO THE BLANKETS; UNIT SHALL BE PROVIDED WITH A SPARE HOSE, HOSE CLIP, SHEET CLIP AND AIR FILTER (HIGH EFFICIENCY FILTER CAPABLE OF WITHSTANDING HAZARDS OF NORMAL USE IN A HOSPITAL SETTING; UNIT SHALL BE TRANSPORTED IN A HARDENED, REUSABLE CARRYING CASE; 2 OPERATORS MANUALS AND TWO SERVICE MANUALS SHALL BE SUPPLIED WITH EACH UNIT |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6530NCM040242 | 64616 |
| USAMMA-AAC-W | 66732 |
| 04-0426 | 89875 |