NSN 6540-00-782-6507 · NIIN 007826507 · FSC 6540
NO DASHES 6540007826507
In Stock
CUTTING MACHINE,OPHTHALMIC LAPS
Ophthalmic Instruments, Equipment, and Supplies
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMSE | VOLTAGE RATING | VOLTS NOMINAL 110.0 |
| ACZB | FREQUENCY RATING | HERTZ NOMINAL 60.0 |
| AHZX | PRIME MOVER HORSEPOWER RATING | 0.250 |
| AKCV | DRIVE TYPE | DIRECT |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | PIN FOR OPERATING LARGE HEAD SCREWS -1,CHUCK FOR TORIC LAPS -1,CHUCK FOR HYCURVE TORIC LAPS -1,CUTTING TOOLS -25,TAPER FOR SPHERE LAPS -1,CAN,OIL -1,GUN,GREASE -1,TRY SQUARE 7 IN. -1,GAGE FOR CUTTINGTOOLS -1,TEMPLETS FROM .12 D TO 3.00 D IN EIGHTS -24 PR,WRENCH 3/4 X 7/8 -1,WRENCH 5/16 X 1/2 -1,FEED PAWL -2,BOLTS -4,CLAMPS -4,SPRING FOR CLAPPER BLOCK -1,SPRING TOOL HOLDER -1 |
| APGF | DESIGN TYPE | BENCH |
| AMWX | FEED METHOD | MANUAL |
| FAAZ | PHASE | SINGLE |
| ACDC | CURRENT TYPE | AC |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CUTTING MACHINE OPHTHAMIC LAPS: 60 HERTZ AC |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10A | 15179 |