NSN 5315-01-159-1190 · NIIN 011591190 · FSC 5315
NO DASHES 5315011591190
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.730 |
| AATR | SHANK LENGTH | INCHES NOMINAL 2.150 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.0445 AND INCHES MAXIMUM 1.0450 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.4990 AND INCHES MAXIMUM 0.4995 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.460 AND INCHES MAXIMUM 4.520 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.229 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES MINIMUM 0.880 AND INCHES MAXIMUM 0.980 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.062 |
| AMFM | SECOND END TAPER LENGTH | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.160 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.500 |
| CRDY | FIRST END LOCATION | THREADED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | SHANK END MICROINCHES 32.0 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 30.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-12 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5659 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |