NSN 2520-01-094-8942 · NIIN 010948942 · FSC 2520
NO DASHES 2520010948942
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 12.781 |
| AETC | METALLIC HARDNESS RATING | MINIMUM ROCKWELL C 38.0 AND MAXIMUM ROCKWELL C 42.0 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 1.619 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.255 AND INCHES MAXIMUM 1.270 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.490 AND INCHES MAXIMUM 1.495 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.750 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.250 |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| BBCD | FIRST END SPLINE QUANTITY | 6 |
| BBCF | SECOND END SPLINE QUANTITY | 30 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624-CANCELED |