NSN 2520-00-943-8475 · NIIN 009438475 · FSC 2520
NO DASHES 2520009438475
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMHL | SECOND END BEARING SEAT DIAMETER | INCHES NOMINAL 1.312 |
| BNTD | FIRST END FACILITY LOCATION | 1.250 IN. BETWEEN GROOVE AND SHOULDER,0.312 IN. FROM END OF SHAFT |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.750 |
| AMHM | SECOND END DISTANCE FROM BEARING SEAT TO END | INCHES NOMINAL 2.750 |
| BNTC | FIRST END FACILITY WIDTH | INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.312 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 12.781 |
| AETC | METALLIC HARDNESS RATING | MAXIMUM ROCKWELL C 42.0 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 1.619 |
| BNPJ | FIRST END FACILITY DIAMETER | INCHES MINIMUM 1.031 AND INCHES MAXIMUM 1.625 |
| ABFF | FURNISHED ITEMS | SECOND END BEARING SEAT |
| BNTW | SECOND END BEARING SEAT WIDTH | INCHES NOMINAL 1.156 |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| BBCD | FIRST END SPLINE QUANTITY | 6 |
| BBCF | SECOND END SPLINE QUANTITY | 19 |
| MATT | MATERIAL | STEEL COMP 4130 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.136 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES NOMINAL 1.265 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES NOMINAL 1.495 |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AISI 4130 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |