NSN 4720-00-758-7109 · NIIN 007587109 · FSC 4720
NO DASHES 4720007587109
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| AAJD | THREAD CLASS | 3B |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 400.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.405 AND INCHES MAXIMUM 0.465 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 3.000 |
| AHNC | CONNECTION STYLE | |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 81343-AS627 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 16000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.212 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES MINIMUM WORKING 21.250 AND INCHES MAXIMUM WORKING 21.750 |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
Supersedes
This item replaces cancelled NIINs 004972352 · 004972353. An older drawing citing one of those numbers resolves here.