NSN 6625-00-930-8284 · NIIN 009308284 · FSC 6625
NO DASHES 6625009308284
In Stock
PHASEMETER
Electrical and Electronic Properties Measuring and Testing Instruments
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADZC | ENVIRONMENTAL PROTECTION | COLD RESISTANT AND HEAT RESISTANT AND SALT SPRAY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 4.680 |
| AAPB | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 2600.0 |
| ANTG | SENSITIVITY RATING | MICROAMPERES 100.0 |
| ABWG | SCALE DIVISION QUANTITY | 20 |
| APPN | ACCURACY IN PERCENT | SINGLE INDICATOR SINGLE RANGE AT FULL SCALE -2.0 TO 2.0 |
| APST | METER DEPTH BEHIND MOUNTING FLANGE | INCHES MAXIMUM 1.150 |
| APSW | METER BODY DIAMETER BEHIND MOUNTING FLANGE | INCHES NOMINAL 2.750 |
| AQEC | MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| ASSS | POINTER COLOR | SINGLE INDICATOR SINGLE RANGE BLACK |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED STUD(S) 4 |
| BHDC | SCALE GRADUATION TYPE | SINGLE INDICATOR SINGLE RANGE LINEAR |
| BHMW | MEASUREMENT RANGE | SINGLE INDICATOR SINGLE RANGE DEGREES, PHASE ANGLE -5.0 TO 5.0 |
| BLKZ | MOUNTING STUD DIAMETER | INCHES NOMINAL 0.138 |
| BLSB | SCALE SELECTION METHOD | TERMINAL |
| CTQL | MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| CTTD | CIRCUIT ATTACHMENT METHOD AND QUANTITY | THREADED STUD 2 |
| HUES | COLOR | BACKGROUND SINGLE INDICATOR SINGLE RANGE WHITE |
| MARK | SPECIAL MARKINGS | MINUS AND PLUS SIGNS ON EITHER SIDE OF 0 |
| MATT | MATERIAL | PLASTIC PHENOL FORMALDEHYDE (PMO) |
| NHCF | NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| STYL | STYLE DESIGNATOR | |
| ZZZV | FSC APPLICATION DATA | TEST SET,ELECT. EQUIP. |
| ANRL | MOUNTING ARRANGEMENT STYLE | |
| AKYN | FURNISHED ITEMS AND QUANTITY | NUT 8; LOCKWASHER 4; FLAT WASHER 4 |
| AMQY | INSTALLATION DESIGN | PANEL |
| AACT | CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| ADAG | MOUNTING STUD LENGTH | INCHES NOMINAL 0.500 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.470 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES NOMINAL 4.000 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 4.090 |
| APMM | DIAL SCALE MARKING COLOR | SINGLE INDICATOR SINGLE RANGE BLACK |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES NOMINAL 3.560 |
| AMKD | INDICATOR TYPE | DIAL W/POINTER |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1941 | 94271 |
| 4017527-0701 | 06845 |