NSN 6635-00-936-7227 · NIIN 009367227 · FSC 6635
NO DASHES 6635009367227
In Stock
TENSIOMETER
Physical Properties Testing and Inspection
Technical characteristics
8 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | A PRECISION DIAL INDICATOR IS MOUNTED AT THE NULL POINT OF THE DEFLECTION BEAM; THE POINTER REVOLVES 360 DEGREES CLOCKWISE UNDER COMPRESSION OR TENSION FORCES; ACCIDENTAL OVERLOADS UP TO 30 PERCENT OF CAPACITY CAN BE SAFELY SUSTAINED WITHOUT INJURY TO THE DIAL INDICATOR OR DEFLECTION BEAM; ALL CAPACITIES FEATURE A 5:1 DESIGN SAFETY FACTOR; MAY BE MOUNTED HORIZONTALLY, VERTICALLY OR FLAT; THE BAKED ENAMEL FINISH RESISTS CORROSION AND RUST; ACCURACY OF +/- ONE PERCENT OF FULL CAPACITY; DIAL DIVISION ONE LBS INCREMENTS |
| SUPP | SUPPLEMENTARY FEATURES | INDICATOR TYPE DIAL |
| APSJ | SCALE QUANTITY | 1 |
| FTLD | FUNCTIONAL DESCRIPTION | LOAD IS APPLIED AGAINST A HARDENED BALL WHICH ROTATES TO MAINTAIN VERTICAL ALIGNMENT AS PRESSURE INCREASES; THE BALL IS HELD IN PLACE WITH A SPRING CLIP; THE THREADED MOUNTING HOLE IS LOCATED OPPOSITE THE LOADING BALL IN THE BOTTOM OF THE BEAM |
| ASPX | SCALE NAME | COMPRESSION |
| APSK | SCALE RANGE | POUNDS 0.0 TO 100.0 |
| AXGY | MOUNTING METHOD | BRACKET(S) |
| BHHW | MATERIAL ACCOMMODATED DIAMETER | INCHES NOMINAL 0.250 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 30386-0043 | 1EW27 |
| 30386-0043 | 17885 |
| XC | 17885 |