NSN 4720-00-876-8841 · NIIN 008768841 · FSC 4720
NO DASHES 4720008768841
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKXL | END FITTING COMPONENT AND MATERIAL | SECOND END SOCKET STEEL CORROSION RESISTING |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND OIL RESISTANT AND HEAT RESISTANT |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| CRXX | MEASURING METHOD AND LENGTH | INCHES MINIMUM WORKING 29.500 |
| AHNC | CONNECTION STYLE | |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 7000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, TETRAFLUOROETHYLENE |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.178 AND INCHES MAXIMUM 0.208 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -67.0 AND FAHRENHEIT 450.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.304 AND INCHES MAXIMUM 0.343 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
| ADJS | EXTERIOR COLOR | NATURAL |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS NIPPLE STEEL CORROSION RESISTING |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AKXL | END FITTING COMPONENT AND MATERIAL | THIRD END NUT STEEL CORROSION RESISTING |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | ALL ENDS NIPPLE PASSIVATE |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | SECOND END SOCKET PASSIVATE |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | THIRD END NUT PASSIVATE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |