NSN 6680-00-081-6708 · NIIN 000816708 · FSC 6680
NO DASHES 6680000816708
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKMH | CORE DIAMETER | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.153 |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| SFTT | SURFACE TREATMENT | CASING CADMIUM |
| SFTT | SURFACE TREATMENT | CORE CADMIUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END UNF |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES MINIMUM 97.437 AND INCHES MAXIMUM 97.562 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.688 |
| CFRR | CASING PROTECTIVE DEVICE TYPE | RUBBER COVER |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION; THREAD SIZE: 5/8-18 FIRST END AND 7/8-18 SECOND END |
| MATT | MATERIAL | CASING STEEL |
| MATT | MATERIAL | CORE STEEL |
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS SECOND END INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.105 |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.153 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 98.078 |
| AECT | THREAD DEPTH | FIRST END INCHES NOMINAL 0.3125 |
| APTD | END TYPE | SECOND END SQUARE MALE |
| ASDB | WIDTH ACROSS FLATS | FIRST END INCHES NOMINAL 1.000 |
| ASDB | WIDTH ACROSS FLATS | SECOND END INCHES NOMINAL 0.750 |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| AEDN | TIP LENGTH | SECOND END INCHES NOMINAL 0.375 |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 98.703 |
| AECT | THREAD DEPTH | SECOND END INCHES NOMINAL 0.375 |
| APTD | END TYPE | FIRST END ROUND KEYED |
| CFRW | END OVERALL DIAMETER | FIRST END INCHES NOMINAL 1.188 |
| CFRW | END OVERALL DIAMETER | SECOND END INCHES NOMINAL 0.875 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END UNS |
| AEDN | TIP LENGTH | FIRST END INCHES NOMINAL 0.828 |