NSN 6680-00-526-8140 · NIIN 005268140 · FSC 6680
NO DASHES 6680005268140
In Stock
GENERATOR,TACHOMETER
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPP | ELECTRICAL RESISTANCE | OHMS 39.0 AND OHMS 49.0 |
| ASDB | WIDTH ACROSS FLATS | SINGLE END INCHES NOMINAL 0.2450 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| AAJT | OVERALL HEIGHT | INCHES 3.172 |
| AAJU | OVERALL LENGTH | INCHES 5.594 |
| AAJV | OVERALL WIDTH | INCHES 2.813 |
| BDJD | ACCURACY RANGE IN PERCENT | -0.5 TO 0.5 |
| TTQY | TERMINAL TYPE AND QUANTITY | RECEPTACLE 1 |
| BFLQ | CALIBRATION SPEED IN RPM | 3600.0 |
| BKPC | CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS | AC 23.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.469 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.875 |
| CWFX | ROTOR SPEED RATING IN RPM | LOW FULL LOAD 200.0 AND HIGH FULL LOAD 4400.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.875 |
| FEAT | SPECIAL FEATURES | 2 ROTOR POLES |
| AXGY | MOUNTING METHOD | PAD |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A15 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2CM5AEN36 | 24446 |
| 2CM5AEN | 24446 |
| 21135TYPEA1 | 80049 |
Supersedes
This item replaces cancelled NIIN 003402405. An older drawing citing one of those numbers resolves here.