NSN 6680-00-553-8892 · NIIN 005538892 · FSC 6680
NO DASHES 6680005538892
In Stock
GENERATOR,TACHOMETER
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| ASDB | WIDTH ACROSS FLATS | SINGLE END INCHES MINIMUM 0.243 AND INCHES MAXIMUM 0.245 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.312 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-G-9398 |
| BFLQ | CALIBRATION SPEED IN RPM | 4200.0 |
| BKPC | CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS | AC 21.0 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.467 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 1.876 |
| TTQY | TERMINAL TYPE AND QUANTITY | CONNECTOR, PLUG 1 |
| AXGY | MOUNTING METHOD | PAD |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 5500.0 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES MINIMUM 0.431 AND INCHES MAXIMUM 0.503 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A15 |
| AAJU | OVERALL LENGTH | INCHES 4.312 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.876 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS25038-4 | 35076 |
| TG255-002 | 35076 |
| MS25038-4 | 54395 |
| MIL-G-9398 | 81349 |
| 6680PL2074770 | 9009H |
| MS25038-4 | 96906 |
| TG255-002 | FAWV7 |
Supersedes
This item replaces cancelled NIINs 000793686 · 005268142 · 009860208. An older drawing citing one of those numbers resolves here.