NSN 6680-00-752-7479 · NIIN 007527479 · FSC 6680
NO DASHES 6680007527479
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ASDB | WIDTH ACROSS FLATS | FIRST END INCHES NOMINAL 1.000 |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.150 |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| ASDB | WIDTH ACROSS FLATS | SECOND END INCHES NOMINAL 0.750 |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION,TORSION STRENGTH WINDING DIRECTION 15.0 LBS.THREAD SIZE IS 5/8-18 AND 7/8-18. |
| MATT | MATERIAL | CORE STEEL |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 100.000 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.500 |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 101.313 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| APTD | END TYPE | FIRST END ROUND KEYED |
| APTD | END TYPE | SECOND END SQUARE MALE |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END UNF |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 101.313 |
| AECT | THREAD DEPTH | FIRST END INCHES NOMINAL 0.327 |
| AECT | THREAD DEPTH | SECOND END INCHES NOMINAL 0.375 |
| AEDN | TIP LENGTH | FIRST END INCHES MINIMUM 1.018 AND INCHES MAXIMUM 1.022 |
| AEDN | TIP LENGTH | SECOND END INCHES MINIMUM 0.950 AND INCHES MAXIMUM 1.010 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END UNS |
| CGDN | MINIMUM OPERATING RADIUS | INCHES 5.000 |
| MATT | MATERIAL | CASING RUBBER AND STEEL |
| ZZZV | FSC APPLICATION DATA | TACHOMETER AND SPEEDOMETER DRIVE |
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS SECOND END INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.104 |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.153 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7527479 | 19207 |
| 1580847 | 24617 |
| 1581437 | 24617 |
| 446125 | 57733 |
| 446125-100 | 57733 |
| 1581437 | 70040 |
| 1580847 | 70040 |
| 446125-100 | 78385 |
| MIL-DTL-10215K | 81349 |
| M10215-1F113 | 81349 |
| MIL-S-10215 | 81349 |
| MIL-DTL-10215 | 81349 |
| MS51071-13 | 96906 |
| 1268972 | 12204 |
Supersedes
This item replaces cancelled NIIN 003014092. An older drawing citing one of those numbers resolves here.