NSN 1650-00-887-1903 · NIIN 008871903 · FSC 1650
NO DASHES 1650008871903
In Stock
MOTOR,HYDRAULIC
Aircraft Hydraulic, Vacuum, and De-icing System Components
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXFN | MOUNTING GOVERNMENT STANDARD | AND 10260 |
| ABSA | SPLINE QUANTITY | 11 |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 0.500 |
| AAXX | MOUNTING TYPE | FLANGE |
| SFTT | SURFACE TREATMENT | HOUSING ANODIZE |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.281 |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ABUJ | THREAD SIZE | 0.375-24 AND 0.562-18 AND 0.562-18 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 6060.000 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.4583 |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI MINUS 65 DEG F TO PLUS 160 DEG F |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 45.4 |
| AAUH | SPLINE MINOR DIAMETER | INCHES NOMINAL 0.408 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.500 |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.000 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| APJC | THREAD LOCATION | FIRST INTERNAL |
| AWLS | CONNECTION TYPE | FIRST END DRAIN |
| AZFG | MOUNTING BOLT HOLE SPACING | 1.876 IN. BY 1.876 IN. C TO C |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| AWLS | CONNECTION TYPE | SECOND END INLET |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | CUBIC INCHES 0.095 |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | AND 10050-6 |
| APJC | THREAD LOCATION | SECOND INTERNAL |
| APJC | THREAD LOCATION | THIRD INTERNAL |
| ASAP | SPLINE PITCH | 24/48 |
| ASMM | CONNECTION QUANTITY | 1 AND 1 AND 1 |
| AWLS | CONNECTION TYPE | THIRD END OUTLET |
| MATT | MATERIAL | HOUSING ALUMINUM ALLOY |