NSN 5340-00-193-2622 · NIIN 001932622 · FSC 5340
NO DASHES 5340001932622
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMZ | DIAMETER | INCHES NOMINAL 0.199 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.051 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| BZTQ | LUG HOLE DIAMETER | INCHES NOMINAL 0.257 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.219 |
| AZDE | CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE | INCHES NOMINAL 1.375 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 1.000 |
| BZTP | DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER | INCHES NOMINAL 0.250 |
| MATT | MATERIAL | CUSHION RUBBER SYNTHETIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-362,T4 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | BONDING STRIP ALUMINUM |
| AHMM | LUG WIDTH | INCHES NOMINAL 0.500 |
| AXWJ | FASTENING DEVICE TYPE | LUG |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.906 |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
Supersedes
This item replaces cancelled NIIN 005227220. An older drawing citing one of those numbers resolves here.