NSN 5307-00-308-2974 · NIIN 003082974 · FSC 5307
NO DASHES 5307003082974
In Stock
STUD,RECESSED AND STEPPED
Studs
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES NOMINAL 0.375 |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL COARSE (UNC) |
| AAJE | THREAD PITCH DIAMETERS | STUD THREAD INCHES 0.5684 TO 0.5701 |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| FEAT | SPECIAL FEATURES | TWO COTTER HOLES AT 90 DEGREES |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.438 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.625 |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | FIRST HOLE INCHES NOMINAL 0.172 |
| ADDV | COTTER PIN HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.094 AND INCHES MAXIMUM 0.101 |
| CMLP | THREAD QUANTITY PER INCH | 11 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| STYL | STYLE DESIGNATOR | |
| AASA | THREAD LENGTH | STUD THREAD INCHES NOMINAL 1.125 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.625 |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNF |
| AAJD | THREAD CLASS | 3A |
| ADCZ | LENGTH OF RECESSED PORTION OF SHANK | INCHES NOMINAL 0.609 |
| ADDA | DIAMETER OF RECESSED PORTION OF SHANK | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.360 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
Supersedes
This item replaces cancelled NIIN 000485699. An older drawing citing one of those numbers resolves here.