NSN 5307-00-308-2975 · NIIN 003082975 · FSC 5307
NO DASHES 5307003082975
In Stock
STUD,STEPPED
Studs
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.625 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNS |
| AAJD | THREAD CLASS | 3A |
| AAJE | THREAD PITCH DIAMETERS | STUD THREAD INCHES 0.5699 TO 0.5716 |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | FIRST HOLE INCHES MINIMUM 0.172 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| ADDV | COTTER PIN HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.094 |
| CMLP | THREAD QUANTITY PER INCH | 11 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.625 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |
| FEAT | SPECIAL FEATURES | TWO COTTER PIN HOLES AT 90 DEGREES APART |
| AASA | THREAD LENGTH | STUD THREAD INCHES NOMINAL 1.125 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.360 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE E-S85010,FSC- 24617 |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.375 |
| CSYM | SURFACE FINISH | OVERALL MICROINCHES 63.0 |
Supersedes
This item replaces cancelled NIIN 000485700. An older drawing citing one of those numbers resolves here.