NSN 5915-00-226-3403 · NIIN 002263403 · FSC 5915
NO DASHES 5915002263403
In Stock
FILTER,LOW PASS
Filters and Networks
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | FIRST FUNCTION MAXIMUM BLANK 1.0 AND MINIMUM BLANK 23.00 AND MINIMUM BLANK 45.0 |
| CQRG | BODY MATERIAL | METAL |
| AFSV | AVERAGE LIFE RATING IN HOURS | 10000.0 |
| AHAJ | REFERENCE FREQUENCY PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED HERTZ BLANK 50.0 |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | THIRD FUNCTION TAB, SOLDER LUG GROUND 1 |
| CRST | BODY SURFACE TREATMENT | TIN |
| AFGA | OPERATING TEMP RANGE | CELSIUS -40.0 TO 85.0 |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED HERTZ BLANK 20.00 AND HERTZ BLANK 100.00 |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | LOCATION NOT OTHERWISE SPECIFIED THREADED STUD(S) 4 |
| CQDR | INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | LOCATION NOT OTHERWISE SPECIFIED BLANK 3.0 |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | FIRST FUNCTION TAB, SOLDER LUG INPUT 1 |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | SECOND FUNCTION TAB, SOLDER LUG OUTPUT 1 |
| FEAT | SPECIAL FEATURES | TERMINALS ON ONE SURFACE |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 13499-673-0973-000 |
| AECR | VIBRATION RESISTANCE RANGE IN HERTZ | 10.0 TO 55.0 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 1.375 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 2.125 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 3.125 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 1.875 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 1.031 AND INCHES MAXIMUM 1.093 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES NOMINAL 2.625 |
| AHAQ | SOURCE IMPEDANCE RATING PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED OHMS BLANK 1.8 |
| AHAS | LOAD IMPEDANCE PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED OHMS BLANK 140.0 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.112 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.125 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.094 |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED HERTZ BLANK 20.00 AND HERTZ BLANK 100.00 AND HERTZ BLANK 500.00 AND HERTZ BLANK 800.00 |
| CQDZ | MAXIMUM DIELECTRIC WITHSTANDING AC RMS VOLTAGE | VOLTS AT SEA LEVEL 100.0 |
Supersedes
This item replaces cancelled NIIN 001018566. An older drawing citing one of those numbers resolves here.