NSN 5315-00-290-1347 · NIIN 002901347 · FSC 5315
NO DASHES 5315002901347
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMFM | SECOND END TAPER LENGTH | INCHES NOMINAL 0.090 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 36.0 |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 30.0 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.050 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.030 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.306 |
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.400 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.400 |
| ABNZ | EFFECTIVE LENGTH | INCHES MINIMUM 3.660 AND INCHES MAXIMUM 3.664 |
| MATT | MATERIAL | OVERALL STEEL COMP 1141 |
| STYL | STYLE DESIGNATOR | |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-637 |
Supersedes
This item replaces cancelled NIIN 003160861. An older drawing citing one of those numbers resolves here.