NSN 3020-00-287-8675 · NIIN 002878675 · FSC 3020
NO DASHES 3020002878675
In Stock
GEAR,INTERNAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 3.000 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 47 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| CBBL | FEATURES PROVIDED | SPUR TEETH |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL SUPERFICIAL 15-N MINIMUM 85.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 14.6000 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 3.465 |
| STYL | STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 80 |
| ANTP | BORE STYLE | |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.300 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 4140 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 2.9375 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 4.380 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 13.3333 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.310 |
Supersedes
This item replaces cancelled NIIN 003180424. An older drawing citing one of those numbers resolves here.