NSN 3020-00-973-1267 · NIIN 009731267 · FSC 3020
NO DASHES 3020009731267
In Stock
GEAR,INTERNAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 4140 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.6200 |
| FEAT | SPECIAL FEATURES | GEAR EXTERNALLY SPLINED,59 TEETH.20 DEG PRESSURE ANGLE,0.44880 IN.CIRCULAR PITCH,6.7816 IN.PITCH DIA,6.890 IN.MIN,6.900 IN.MAX MAJOR DIA,5.700 IN.MIN,5.705 IN.MAX MINOR DIA,0.745 IN.MIN,0.775 IN.MAX LG OF SPLINE |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| AJLA | TEETH QUANTITY | 59 |
| CBBL | FEATURES PROVIDED | SPIRAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 24.0 AND ROCKWELL C MAXIMUM 34.0 |
| CWNH | TOOTH FORM | STANDARD |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.660 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.1875 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.9000 |