NSN 5310-00-818-0490 · NIIN 008180490 · FSC 5310
NO DASHES 5310008180490
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 119.0 AND DEGREES MAXIMUM 121.0 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 60.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 2.875 |
| CRHC | HOLE CONFIGURATION STYLE | |
| ACTD | NUT DIAMETER | INCHES MINIMUM 3.459 AND INCHES MAXIMUM 3.479 |
| ADBM | DRIVE POINT QUANTITY | 8 |
| BZRR | THREAD SERIES | UN |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2481 |
| AAJD | THREAD CLASS | 3B |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.201 |
| ABQU | DRIVE POINT DEPTH | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| ACTA | NUT STYLE | |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| ADBG | NUT THICKNESS | INCHES MINIMUM 0.415 AND INCHES MAXIMUM 0.425 |
| CBBL | FEATURES PROVIDED | CASE-HARDENED |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 8 |