NSN 6105-01-122-5184 · NIIN 011225184 · FSC 6105
NO DASHES 6105011225184
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 9.250 |
| AAJU | OVERALL LENGTH | INCHES 16.562 |
| AAJV | OVERALL WIDTH | INCHES 10.562 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 1.1250 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BFNG | KEY HEIGHT ABOVE SHAFT | SINGLE END INCHES NOMINAL 0.1250 |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 184 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 5.0000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.500 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 4.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.500 |
| CWDY | TEMP RATING | OPERATING CELSIUS 45.0 AND AMBIENT CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 1800.0 AND SINGLE FULL LOAD 1730.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 7.500 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 7.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A30 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |