NSN 3120-00-612-7490 · NIIN 006127490 · FSC 3120
NO DASHES 3120006127490
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.5880 AND INCHES MAXIMUM 0.5930 |
| AGGH | OUTER MEMBER WIDTH | INCHES MAXIMUM 0.4330 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.312 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.8430 |
| AAZF | SHANK STYLE | |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MAXIMUM 0.9370 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 2.3650 AND INCHES MAXIMUM 2.3850 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AGHB | SHANK WIDTH ACROSS WRENCH FLATS | INCHES MINIMUM 0.4280 AND INCHES MAXIMUM 0.4480 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.7180 AND INCHES MAXIMUM 0.8120 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| FEAT | SPECIAL FEATURES | 0.2920 IN. MAX,0.3200 IN. MAX OFFSET BETWEEN CENTERLINES OF BORE AND SHANK |
| MATT | MATERIAL | INNER MEMBER STEEL |
| MATT | MATERIAL | ROD END BODY STEEL CORROSION RESISTING |
| SFTT | SURFACE TREATMENT | INNER MEMBER CHROMIUM |
| AGHA | INSPECTION HOLE CENTER TO END DISTANCE | INCHES MINIMUM 0.4270 AND INCHES MAXIMUM 0.4470 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2515 |
| CMLP | THREAD QUANTITY PER INCH | 24 |