NSN 6115-01-172-6164 · NIIN 011726164 · FSC 6115
NO DASHES 6115011726164
In Stock
GENERATOR,ALTERNATING CURRENT
Generators and Generator Sets, Electrical
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 42.940 |
| AAJU | OVERALL LENGTH | INCHES 65.550 |
| AAJV | OVERALL WIDTH | INCHES 34.750 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 2.750 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | COMPOUND WOUND |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 8 |
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| CNXS | POWER RATING | OUTPUT KILOWATTS 750.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.910 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 17.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 30.000 |
| CWFX | ROTOR SPEED RATING IN RPM | HIGH FULL LOAD 1800.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 30.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | OUTPUT LINE TO LINE SINGLE 28.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |