NSN 4720-00-295-8130 · NIIN 002958130 · FSC 4720
NO DASHES 4720002958130
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: GENERAL MOTORS ENGINE ASSEMBLY,GAS TURBINE MODEL 501K34
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 1500.0 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 13.875 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.173 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.343 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
| AGAV | END ITEM IDENTIFICATION | GENERAL MOTORS ENGINE ASSEMBLY,GAS TURBINE MODEL 501K34 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.438 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 750.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SOURCE CONTROL 73342-6851549 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ETHYLENE GLYCOL RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND VIBRATION RESISTANT AND WATER RESISTANT |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |