NSN 5962-01-025-2583 · NIIN 010252583 · FSC 5962
NO DASHES 5962010252583
In Stock
MICROCIRCUIT,MEMORY
Microcircuits, Electronic
Application: CIRCUIT CARD ASSY P/N 686710 FSCM 06481
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.371 AND INCHES MAXIMUM 0.400 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.247 AND INCHES MAXIMUM 0.285 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.080 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | MILLIWATTS 375.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| AGAV | END ITEM IDENTIFICATION | CIRCUIT CARD ASSY P/N 686710 FSCM 06481 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/ENABLE AND W/COMPLEMENT AND W/OPEN COLLECTOR AND W/STORAGE AND HIGH SPEED |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | FLAT PACK |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 10 INPUT |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MINIMUM POWER SOURCE -1.5 AND VOLTS MAXIMUM POWER SOURCE 5.5 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 60.00 |
| CZER | MEMORY DEVICE TYPE | RAM |
| CZZZ | MEMORY CAPACITY | UNKNOWN |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 06481-971001 |
| TTQY | TERMINAL TYPE AND QUANTITY | FLAT LEADS 16 |
Supersedes
This item replaces cancelled NIINs 010144037 · 010178413 · 010428071 · 010587965. An older drawing citing one of those numbers resolves here.