NSN 5306-01-286-6388 · NIIN 012866388 · FSC 5306
NO DASHES 5306012866388
In Stock
BOLT,INTERNALLY RELIEVED BODY
Bolts
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.343 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.573 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.690 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.100 |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.295 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.108 |
| AAWX | CONCENTRIC HOLE DEPTH | INCHES NOMINAL 1.160 |
| AAXC | CONCENTRIC HOLE DIAMETER | INCHES MINIMUM 0.205 AND INCHES MAXIMUM 0.215 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 1.470 |
| FEAT | SPECIAL FEATURES | GRIP CLOSE TOLERANCE 0.373 MIN. IN. DIAMETER AND 0.374 MAX. IN. DIAMETER,LENGTH OF GRIP 1.225 MIN. IN. AND 1.235 MAX. IN.; PAINT WHITE ENAMEL,FIRST UNDER CUT,FLAT SIDE OF HEAD,INTERNAL HOLE,CHAMPER |
| HUES | COLOR | TOP OF HEAD WHITE |
| HUES | COLOR | POINT WHITE |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| SFTT | SURFACE TREATMENT | POINT ENAMEL |
| SFTT | SURFACE TREATMENT | TOP OF HEAD ENAMEL |
| SFTT | SURFACE TREATMENT | GRIP CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | SIDES OF HEAD CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | THREADS CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | POINT MFR REF SINGLE TREATMENT RESPONSE --S-420,CAGEC 76301 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | THREADS MFR REF SINGLE TREATMENT RESPONSE S13145,CAGEC 76301 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | GRIP MFR REF SINGLE TREATMENT RESPONSE S13145,CAGEC 76301 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TOP OF HEAD MFR REF SINGLE TREATMENT RESPONSE --S-420,CAGEC 76301 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SIDES OF HEAD MFR REF SINGLE TREATMENT RESPONSE S13145,CAGEC 76301 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |