NSN 5360-01-250-7459 · NIIN 012507459 · FSC 5360
NO DASHES 5360012507459
In Stock
SPRING,HELICAL,TORSION
Coil, Flat, Leaf, and Wire Springs
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARX | INSIDE DIAMETER | INCHES NOMINAL 5.180 |
| AGEK | SPRING FREE LENGTH | INCHES NOMINAL 1.115 |
| APCN | COIL QUANTITY | 3-3/4 |
| AXLH | COIL HELIX DIRECTION | RIGHT-HAND |
| AXLQ | SPRING FREE OUTSIDE DIAMETER | INCHES NOMINAL 6.000 |
| CRTL | CRITICALITY CODE JUSTIFICATION | SUPP |
| FEAT | SPECIAL FEATURES | ENDS THINNER AND WIDER FOR APPROX. LAST 2.140 IN.; EACH END HAS TWO PUNCHED HOLES,0.318 IN. DIA,CENTERED 1.250 IN. APART WITH A SMALLER,THREADED HOLE BETWEEN THEM,CSK 90.0 DEG BY 0.275 IN. DIA,0.250-28 UNJF-3B |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| SUPP | SUPPLEMENTARY FEATURES | ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS HEAT TREATMENT, SURFACE FINISH, OR MATERIAL TYPE AND SPECIAL INSP. REQ.S SUCH AS MAGNETIC PARTICLE INSP. OR FLUORESCENT PENETRANT INSPECTION |