NSN 5340-01-257-5231 · NIIN 012575231 · FSC 5340
NO DASHES 5340012575231
In Stock
CLAMP,BLOCK
Hardware, Commercial
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.560 AND INCHES MAXIMUM 3.590 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.758 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | INCHES MINIMUM 0.205 AND INCHES MAXIMUM 0.211 |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE(S) |
| BYGG | BLOCK HEIGHT | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.255 |
| CWTD | CLAMPING HOLE QUANTITY | 5 |
| CWWM | CLAMPING HOLE DIAMETER | SECOND HOLE INCHES MINIMUM 0.391 AND INCHES MAXIMUM 0.395 |
| CWWM | CLAMPING HOLE DIAMETER | FOURTH HOLE INCHES MINIMUM 0.391 AND INCHES MAXIMUM 0.395 |
| CWWM | CLAMPING HOLE DIAMETER | THIRD HOLE INCHES MINIMUM 0.391 AND INCHES MAXIMUM 0.395 |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.874 |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | INCHES MINIMUM 0.600 AND INCHES MAXIMUM 0.602 |
| CWYH | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | INCHES NOMINAL 2.133 |
| CWYM | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES | INCHES MINIMUM 3.060 AND INCHES MAXIMUM 3.064 |
| FEAT | SPECIAL FEATURES | HAS 2 SLOTTED CLAMPING HOLES ON EACH END,LG 0.313 IN.,WIDTH 0.205 IN. TO 0.211 IN. |
| MATT | MATERIAL | PLASTIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL--15035 |
| STYL | STYLE DESIGNATOR |