NSN 5310-00-282-7848 · NIIN 002827848 · FSC 5310
NO DASHES 5310002827848
In Stock
NUT,SELF-LOCKING,HEXAGON
Nuts and Washers
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 250.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NUT MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| BZRR | THREAD SERIES | UNF |
| ABAJ | LUBRICATION | SOLUBLE LUBRICANT |
| ACTA | NUT STYLE | |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES NOMINAL 88.0 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.741 AND INCHES MAXIMUM 0.752 |
| SFTT | SURFACE TREATMENT | NUT ANODIZE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.500 |
| MATT | MATERIAL | NUT ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT FED SPEC 1ST MATERIAL RESPONSE QQ-A-200 TO 2,T6 OR FED SPEC 2ND MATERIAL RESPONSE QQ-A-225 TO 5,T4 OR FED SPEC 3RD MATERIAL RESPONSE QQ-A-225 TO 6,T6 OR FED SPEC 4TH MATERIAL RESPONSE QQ-A-200 TO 11,T6 |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.575 AND INCHES MAXIMUM 0.610 |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 125.0 |
| AAJD | THREAD CLASS | 3B |
| AAWY | COUNTERBORE DIAMETER | NUT INCHES MINIMUM 0.511 AND INCHES MAXIMUM 0.551 |
| CMLP | THREAD QUANTITY PER INCH | 20 |