NSN 5905-00-019-4599 · NIIN 000194599 · FSC 5905
NO DASHES 5905000194599
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.100 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 19200-10545436 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 4 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 1000.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.500 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.670 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 1.1000 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.00 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -1.00 TO 1.00 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 85.0 |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -400.0 TO 400.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS SINGLE SECTION -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.0000 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.973 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0500 |