NSN 5315-01-483-0265 · NIIN 014830265 · FSC 5315
NO DASHES 5315014830265
In Stock
PIN,STRAIGHT,HEADLESS
Nails, Machine Keys, and Pins
Application: AIRCRAFT, HORNET, F/A-18
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| ACHT | PIN OVERALL LENGTH | INCHES NOMINAL 1.849 |
| ACHU | PIN OVERALL DIAMETER | INCHES NOMINAL 0.7160 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, HORNET, F/A-18 |
| AKTN | SECOND END SLOT WIDTH | INCHES NOMINAL 0.100 |
| AKTX | FIRST END COUNTERBORE DIAMETER | INCHES NOMINAL 0.529 |
| AKTZ | FIRST END COUNTERBORE DEPTH | INCHES NOMINAL 0.390 |
| AMGR | SECOND END SLOT DEPTH | INCHES NOMINAL 1.459 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CTTF | SECOND END OUTER RADIUS | INCHES MINIMUM 0.008 AND INCHES MAXIMUM 0.015 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PLUNGER |
| FEAT | SPECIAL FEATURES | STYLE VERY UNIQUE;CHAMFERED TIP IS CUT AT A 30 DEGREE ANGLE AND THE END IS CUT AT .100 DIAMER WITH A SLOT ALL THE WAY THROUGH THE ITEM UNTIL IT MEETS THE OPEN END;OPEN END HAS A THRU SLOT 0.041 X .188, EXTERNALLY THREADED END .500 UN 3A |
| MATT | MATERIAL | OVERALL STEEL COMP 1215 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-637 |
| SFTT | SURFACE TREATMENT | OVERALL CHROMIUM AND NICKEL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ-N-290,CLASS2 AND FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320,CLASS 2 |