NSN 5905-00-851-8212 · NIIN 008518212 · FSC 5905
NO DASHES 5905008518212
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.8750 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 9 |
| AAPN | SECTION QUANTITY | 3 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.500 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 90.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | 1ST SECTION -35.0 TO 35.0 AND 2ND SECTION -35.0 TO 35.0 AND 3RD SECTION -20.0 TO 20.0 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.45 |
| AEFY | SHAFT END PLAY | INCHES 0.002 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.7500 |
| BYDT | BEARING TYPE | SHAFT BALL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR 1ST SECTION 1.0 AND FREE AIR 2ND SECTION 0.25 AND FREE AIR 3RD SECTION 1.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | 1ST SECTION ZERO BASED LINEARITY AND 2ND SECTION INDEPENDENT LINEARITY AND 3RD SECTION ZERO BASED LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 20.0 AND KILOHMS 2ND SECTION 100.0 AND KILOHMS 3RD SECTION 5.0 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 354.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.45 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.1248 AND INCHES MAXIMUM 0.125 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.750 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.376 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.003 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.25 TO 0.25 AND 2ND SECTION -1.00 TO 1.00 AND 3RD SECTION -0.25 TO 0.25 |