NSN 1620-01-082-0689 · NIIN 010820689 · FSC 1620
NO DASHES 1620010820689
In Stock
PISTON AND CYLINDER
Aircraft Landing Gear Components
Technical characteristics
6 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 22.935 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 4.020 AND INCHES MAXIMUM 4.080 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PISTON AND CYLINDER ASSY, STOCK STRUT - TAIL LANDING GEAR |
| FEAT | SPECIAL FEATURES | FINISH: SS 8555 EXTERIOR PAINT, CHEMICAL SURFACE TREATMENT PER SS8486, PRIMER PER TT-P-1757 (2 COATS) |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SUPP | SUPPLEMENTARY FEATURES | BEFORE PAINTING PART, SEAL CHROMIUM PROCESS PART AS FOLLOWS: A) CLEAN PER SS8423; B) PACKAGE IN DUSTPROOF BAG; C) VACUUM IMPREGNATE USING MIL-I-17563, CLASS IV MATERIAL, CURE AND CLEAN SURFACES; D) INSPECT FOR EXCESS RESIN ON CHROMIUM SURFACE AND REMOVE IF PRESENT; E)AFTER INSPECTION, REPEAT VACUUM IMPREGNATION PROCESS AND REPEAT INSPECTION; F)ALT SEALANTS FOR PMS-10E ARE PMS-10F OR RESINOL RTC |