NSN 5935-00-869-2803 · NIIN 008692803 · FSC 5935
NO DASHES 5935008692803
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.102 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AFRF | CONTACT MAXIMUM FREQUENCY RATING | SINGLE MATING END SINGLE CONTACT GROUPING MEGAHERTZ 26000.0 |
| AFRT | SHELL TYPE | SOLID |
| AFQW | MATING END QUANTITY | 1 |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD AND SILVER |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC TETRAFLUOROETHYLENE |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.560 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.500 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 0.340 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.340 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES NOMINAL 0.310 |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.200 |
| CMLP | THREAD QUANTITY PER INCH | 36 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST TREATMENT RESPONSE -IL-G-45204,@CLASS 1,TYE 2,@ AND FED SPEC 2ND TREATMENT RESPONSE QQ-N-290,CLASS 2 |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS 303,COND A |
| CXCG | INCLUDED CONTACT QUANTITY | 1 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING COAXIAL SOCKET |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT @AND SHELL SURFACES AND SILVER CONTACT SURFACES |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING FED SPEC SINGLE MATERIAL RESPONSE QQ-C-530,CO- HT |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND VIBRATION RESISTANT |
| CSPT | SHELL MATERIAL | STEEL COMP 303 |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.105 AND SILVER GRAINS, TROY 0.005 |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| CSWM | SHELL SURFACE TREATMENT | GOLD AND NICKEL |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC 1ST TREATMENT RESPONSE -IL-G-45204,CLASS 1,TYE 2 AND FED SPEC 2ND TREATMENT RESPONSE QQ-S-365 |
| THSD | THREAD SERIES DESIGNATOR | UNS |
Supersedes
This item replaces cancelled NIIN 001470073. An older drawing citing one of those numbers resolves here.