NSN 6105-01-370-2564 · NIIN 013702564 · FSC 6105
NO DASHES 6105013702564
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 10.750 |
| AAJU | OVERALL LENGTH | INCHES 16.380 |
| AAJV | OVERALL WIDTH | INCHES 10.500 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF PROTECTED-45 DEG |
| AXGY | MOUNTING METHOD | FLANGE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CNMM | FRAME SIZE DESIGNATION | 213TC |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 7.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 3.120 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | FIRST END INCHES 5.250 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.500 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1760.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 8.500 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 5.250 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 9.300 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO LINE SINGLE 460.0 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |