NSN 3040-01-124-3789 · NIIN 011243789 · FSC 3040
NO DASHES 3040011243789
In Stock
SHAFT,STRAIGHT
Miscellaneous Power Transmission Equipment
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.750 |
| ABKZ | EXTERNAL KEYWAY LENGTH | FIRST END INCHES NOMINAL 1.380 |
| ACMD | SECOND END WIDTH ACROSS FLATS | INCHES MINIMUM 0.560 AND INCHES MAXIMUM 0.561 |
| AMCZ | FIRST END KEYWAY WIDTH | INCHES MINIMUM 0.1880 AND INCHES MAXIMUM 0.1900 |
| AMDG | FIRST END KEYWAY DEPTH | INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.121 |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | INCHES NOMINAL 0.810 |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 0.7500 |
| AMDX | FIRST END HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.2800 |
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 0.7500 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.2800 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 0.630 |
| AMHD | SECOND END HOLE DEPTH | INCHES MINIMUM 0.560 AND INCHES MAXIMUM 0.561 |
| CSYM | SURFACE FINISH | MICROINCHES 63.0 |
| CTBM | SECOND END STEP LENGTH | INCHES NOMINAL 1.000 |
| MATT | MATERIAL | STEEL COMP 304 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND B |