NSN 6105-00-184-9059 · NIIN 001849059 · FSC 6105
NO DASHES 6105001849059
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWDY | TEMP RATING | OPERATING CELSIUS -50.0 AND OPERATING CELSIUS 160.0 |
| AAJU | OVERALL LENGTH | INCHES 9.460 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6248 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 2.5000 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 3.125 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BKPB | CURRENT RATING METHOD | LOAD |
| AAJT | OVERALL HEIGHT | INCHES 5.500 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| BTBY | SHAFT END STYLE | |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.880 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 2.812 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 2.000 |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |