NSN 5306-01-278-1964 · NIIN 012781964 · FSC 5306
NO DASHES 5306012781964
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.438 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.968 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.203 AND INCHES MAXIMUM 0.235 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.563 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.4320 AND INCHES MAXIMUM 0.4335 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES NOMINAL 1.530 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 1.775 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE A-S 6485 OR MIL SPEC SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | HEAD CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | THREADS CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | HEAD FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2 CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | THREADS FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2 CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |