NSN 1680-00-528-1729 · NIIN 005281729 · FSC 1680
NO DASHES 1680005281729
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Miscellaneous Aircraft Accessories and Components
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXFH | SPLINE LENGTH | BOTH ENDS INCHES MINIMUM 0.232 AND INCHES MAXIMUM 0.255 |
| AXYS | SPLINE TYPE | BOTH ENDS INVOLUTE |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| APTD | END TYPE | BOTH ENDS ROUND, INTERNAL SPLINED |
| ASDB | WIDTH ACROSS FLATS | BOTH ENDS INCHES NOMINAL 0.750 |
| MATT | MATERIAL | CORE STEEL |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.445 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 9.688 |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.250 |
| AAJD | THREAD CLASS | 2A |
| SCSZ | CROSS SECTION SIZE | DIAMETER BOTH ENDS INCHES NOMINAL 0.406 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 |
| AEDN | TIP LENGTH | BOTH ENDS INCHES MINIMUM 0.232 AND INCHES MAXIMUM 0.255 |
| AGJR | MINOR DIAMETER | SPLINE BOTH ENDS INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.242 |
| AGJS | PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | BOTH ENDS UNS |
| AAUJ | SPLINE MAJOR DIAMETER | BOTH ENDS INCHES MINIMUM 0.304 AND INCHES MAXIMUM 0.310 |
| ZZZV | FSC APPLICATION DATA | FLAP,COWL INSTALLATION,AIRCRAFT |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 8.750 |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| MATT | MATERIAL | CASING STEEL |
| AECT | THREAD DEPTH | BOTH ENDS INCHES NOMINAL 0.219 |
| ABSA | SPLINE QUANTITY | 12 |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 9.688 |