NSN 5990-00-775-1016 · NIIN 007751016 · FSC 5990
NO DASHES 5990007751016
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.5320 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2495 AND INCHES MAXIMUM 2.2500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.4100 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2404 AND INCHES MAXIMUM 0.2407 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3100 AND INCHES MAXIMUM 0.4400 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9900 AND INCHES MAXIMUM 1.9930 |
| CQTM | TERMINAL LOCATION | REAR |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 25.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 05869-717480-2 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 2.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 1.00 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0010 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2470 AND INCHES MAXIMUM 0.2530 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.9790 AND INCHES MAXIMUM 1.9930 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.3550 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0030 |
| CQRG | BODY MATERIAL | ALUMINUM OR STEEL COMP 303 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 40.0 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0050 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.965 AND ROTOR TO STATOR MAXIMUM 0.985 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCATION NOT OTHERWISE SPECIFIED ASSN STD SINGLE MATERIAL RESPONSE AISI 303 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| SFTT | SURFACE TREATMENT | ANODIZE |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 19.000 AND INPUT TO OUTPUT MAXIMUM 25.000 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |