NSN 3110-01-289-9254 · NIIN 012899254 · FSC 3110
NO DASHES 3110012899254
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.3120 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.6250 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.8750 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |
| CTHQ | BEARING PRELOAD RATING | POUNDS MINIMUM 4.0 AND POUNDS MAXIMUM 6.0 |
| CTHY | CONTACT ANGLE | DEGREES NOMINAL 30.0 |
| FEAT | SPECIAL FEATURES | EACH BEARING SHALL BE LUBRICATED WITH 2 DROPS OF SPECIFIED LUBRICANT |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE CODE 7001,717806000 CAGEC 04939 |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | LUBRICATION OIL |
| MATT | MATERIAL | RETAINER PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD SINGLE MATERIAL RESPONSE A-S 3655 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND A |
| SFTT | SURFACE TREATMENT | BALL PASSIVATE |
| SFTT | SURFACE TREATMENT | OUTER RING PASSIVATE |
| SFTT | SURFACE TREATMENT | INNER RING PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING MFR REF SINGLE TREATMENT RESPONSE CODE 2402,717806000 CAGEC 04939 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BALL MFR REF SINGLE TREATMENT RESPONSE CODE 2402,717806000 CAGEC 04939 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER RING MFR REF SINGLE TREATMENT RESPONSE CODE 2402,717806000 CAGEC 04939 |
| STYL | STYLE DESIGNATOR |