NSN 5910-00-912-5387 · NIIN 009125387 · FSC 5910
NO DASHES 5910009125387
In Stock
CAPACITOR,FIXED,PLASTIC DIELECTR
Capacitors
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.025 |
| AAQL | BODY STYLE | |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.375 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.000 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -5.00 TO 5.00 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHM-MICROFARADS 5000.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CWSS | DIELECTRIC MATERIAL | PLASTIC |
| MATT | MATERIAL | CASE PLASTIC |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 50.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 0.010 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.000 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.095 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES MINIMUM 0.270 AND INCHES MAXIMUM 0.330 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.265 |
| AFHW | INTERNAL ELECTRICAL CONNECTION TYPE | EXTENDED FOIL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -900.0 TO 900.0 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
Supersedes
This item replaces cancelled NIIN 009641347. An older drawing citing one of those numbers resolves here.