NSN 3040-01-485-1815 · NIIN 014851815 · FSC 3040
NO DASHES 3040014851815
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: LOS ANGELES CLASS SSN
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 29.125 |
| AGAV | END ITEM IDENTIFICATION | LOS ANGELES CLASS SSN |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 4.9950 AND INCHES MAXIMUM 4.9980 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 4.5000 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 5.0020 AND INCHES MAXIMUM 5.0050 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 5.4900 AND INCHES MAXIMUM 5.5000 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 4.9950 AND INCHES MAXIMUM 4.9980 |
| AMHP | SECOND END INTERNAL THREAD LENGTH | INCHES NOMINAL 0.870 |
| ATPC | STEP QUANTITY | 4 |
| BDSQ | FIRST END SPLINE QUANTITY | 20 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 5.490 AND INCHES MAXIMUM 5.500 |
| CSYM | SURFACE FINISH | MICROINCHES 63.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,TORQUE |
| FEAT | SPECIAL FEATURES | NHA VLS MISSILE TUBE MUZZLE HATCH |
| MATT | MATERIAL | TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-T-9047 ALY TI-6AL-4V, COND A |
| SUPP | SUPPLEMENTARY FEATURES | FIRST END HAS CENTER JACKING HOLE COUNTERBORED AND THREADED .500-13UNC-2B: SECOND END ALSO HAS CENTER HOLE AND THREE (3) HOLES SPACED 120 DEGREES ON 3.750 DIA. CENTERS; HOLES ARE COUNTERSUNK 1.33 0.67 X 90 AND THREADED .625-11UNC-2B TO .87 MIN FULL THREAD: SHAFT HAS 2 SPLINES; 1ST END SPLINE LENGTH 4.500 IN., THEN 11.250 STRAIGHT SHAFT, THEN SECOND SPLINE (SAME SPLINE DATA) 5.00 IN. LONG, LEAVING 8.375 IN. STRAIGHT SHAFT LENGTH 2ND END |